TPS3828-33DBVR
ai chip 2.93V digital electronics ic
,ai chip Surface Mount digital electronics ic
,ai chip TPS3828-33DBVR
Supervisor Open Drain or Open Collector 1 Channel SOT-23-5
| Type | Parameter |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Operating Temperature | -40°C~85°C TA |
| JESD-609 Code | e4 |
| Part Status | Active |
| Number of Terminations | 5 |
| Type | Simple Reset/Power-On Reset |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 2.93V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Output | Open Drain or Open Collector |
| Number of Outputs | 1 |
| Max Supply Voltage | 5.5V |
| Operating Supply Current | 15μA |
| Power Dissipation | 437mW |
| Max Supply Current | 25μA |
| Quiescent Current | 15μA |
| Reset | Active Low |
| Min Reset Threshold Voltage | 2.86V |
| Threshold Voltage | +2.93V |
| Overvoltage Threshold | 3V |
| Height | 1.45mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 12 Weeks |
| Mounting Type | Surface Mount |
| Number of Pins | 5 |
| Packaging | Tape & Reel (TR) |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 437mW |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Base Part Number | TPS3828 |
| Pin Count | 5 |
| Number of Channels | 1 |
| Min Supply Voltage | 1.1V |
| Nominal Supply Current | 15μA |
| Output Current | -400μA |
| Adjustable Threshold | NO |
| Watchdog Timer | Yes |
| Reset Timeout | 120ms Minimum |
| Max Reset Threshold Voltage | 3V |
| Undervoltage Threshold | 2.93V |
| Ambient Temperature Range High | 85°C |
| Length | 2.9mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| Lead Free | Lead Free |
TPS3828-33DBVR Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 3.3V is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. A total of 5 pins are located on this power management. 5 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Power management recommends the Surface Mount mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 15μA volt supply current. Additionally, IC management are a variety of features, for example [0], to name a few. To find similar IC managements from the manufacturer, you can always search by TPS3828. The maximum supply temperature voltage supervisor can handle is 25μA. This IC management's architecture allows for 1 outputs.
TPS3828-33DBVR Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current
PS3828-33DBVR Applications
There are a lot of Texas Instruments
TPS3828-33DBVR Voltage Supervisors applications.
Transformer load monitoring equipment
External alarm
Display equipment
DC stabilized power supply module
Insulation fault location system
Magnetic resonance imaging
Stable power system
Sensitive sensors
Efficient information transmission
Functional modules